C9136I-E

C9136I-Q Cisco Catalyst 9136I Series, Internal Antennas,-Q Regulator

C9136I-Q Cisco Catalyst 9136I Series, Internal Antennas,-Q Regulator

  • C9136I-Q Cisco Catalyst 9136I Series, Internal Antennas,-Q Regulator
  • CON-SNT-C9136IQX SNTC-8X5XNBD Cisco Catalyst 9136I Series, Internal A
  • SW9136-CAPWAP-K9 Capwap software for Catalyst 9136I
  • AIR-AP-T-RAIL-R Ceiling Grid Clip for APs & Cellular Gateways-Recessed
  • AIR-AP-BRACKET-1 802.11 AP Low Profile Mounting Bracket (Default)
  • AIR-DNA-E Wireless Cisco DNA On-Prem Essential, Term Lic
Hàng chính hãng Giao hàng toàn quốc Sẵn hàng

    Chat trực tuyến?

    Giá bán: Liên hệ giá tốt nhất(Gọi điện, chat zalo hoặc email để nhận báo giá)

    Giao hàng tận nơi Miễn phí vận chuyển

    C9136I-Q Cisco Catalyst 9136I Series, Internal Antennas,-Q Regulator

    Part NumberDescription
    C9136I-QCisco Catalyst 9136I Series, Internal Antennas,-Q Regulator
    CON-SNT-C9136IQXSNTC-8X5XNBD Cisco Catalyst 9136I Series, Internal A
    SW9136-CAPWAP-K9Capwap software for Catalyst 9136I
    AIR-AP-T-RAIL-RCeiling Grid Clip for APs & Cellular Gateways-Recessed
    AIR-AP-BRACKET-1802.11 AP Low Profile Mounting Bracket (Default)
    CDNA-E-C9136Wireless Cisco DNA  On-Prem Essentials, 9136 Tracking
    DNA-E-3Y-C9136C9136I Cisco DNA On-Prem Essential,3Y Term,Trk Lic
    AIR-DNA-EWireless Cisco DNA On-Prem Essential, Term Lic
    AIR-DNA-E-3YWireless Cisco DNA On-Prem Essential, 3Y Term Lic
    PI-LFAS-AP-TPrime AP Term Licenses
    PI-LFAS-AP-T-3YPI Dev Lic for Lifecycle & Assurance Term 3Y
    AIR-DNA-E-TWireless Cisco DNA On-Prem Essential, Term, Tracker Lic
    AIR-DNA-E-T-3YWireless Cisco DNA On-Prem Essential, 3Y Term, Tracker Lic
    AIR-DNA-NWSTACK-EAIR CISCO DNA Perpetual Network Stack
    NETWORK-PNP-LICNetwork Plug-n-Play Connect for zero-touch device deployment
    C9136I-SINGLESINGLE PACK OPTION
    C9136I-OVERC9136I OVER OPTION

    Product Datasheet

    Product C9136I-Q specifications:

    ItemSpecification
    Part numbersCisco Catalyst 9136I Access Point: Indoor environments, with internal antennas
    ●  C9136I-x: Cisco Catalyst 9136 Series
    Regulatory domains: (x = regulatory domain)
    Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
    Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.
    Cisco Wireless LAN Services
    ●  For details on optional WLAN Services, visit Services for Wireless and Mobility
    SoftwareCatalyst 9136I
    ●  Cisco IOS ® XE Software Release 17.7.1 or later
    Supported wireless LAN controllers●  Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
    802.11n version 2.0 (and related) capabilities●  4×4 MIMO with four spatial streams
    ●  Maximal Ratio Combining (MRC)
    ●  802.11n and 802.11a/g
    ●  20- and 40-MHz channels
    ●  PHY data rates up to 1.5 Gbps (40 MHz with 5-GHz and 20 MHz with 2.4-GHz)
    ●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
    ●  802.11 Dynamic Frequency Selection (DFS)
    ●  Cyclic Shift Diversity (CSD) support
    802.11ac●  8×8 downlink MU-MIMO with eight spatial streams
    ●  MRC
    ●  802.11ac beamforming
    ●  20-, 40-, 80-, and 160-MHz channels
    ●  PHY data rates up to 3.4 Gbps (8×8 80 MHz or dual 4×4 80+80 MHz on 5-GHz)
    ●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
    ●  802.11 DFS
    ●  Cyclic Shift Diversity (CSD) support
    ●  Wi-Fi Protected Access (WPA) 3 support
    802.11ax●  8×8 uplink/downlink MU-MIMO with eight spatial streams (5-GHz)
    ●  4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6-GHz)
    ●  Uplink/downlink OFDMA
    ●  TWT
    ●  BSS coloring
    ●  MRC
    ●  802.11ax beamforming
    ●  20-, 40-, 80-, and 160-MHz channels (6-GHz)
    ●  20-, 40-, 80-, 80+80-MHz (5-GHz)
    ●  20-MHz channels (2.4-GHz)
    ●  PHY data rates up to 10.2 Gbps (4×4 160 MHz on 6 GHz, 8×8 80 MHz on 5-GHz, and 4×4 20 MHz on 2.4-GHz)
    ●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
    ●  802.11 DFS
    ●  CSD support
    ●  WPA3 support
    Integrated antenna●  2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
    ●  5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
    ●  6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
    Interfaces●  2x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45)
    ●  Management console port (RJ-45)
    ●  USB 2.0 at 9W
    Indicators●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
    Dimensions●  Access point (without mounting brackets):
    (W x L x H)◦      9.9 x 9.9 x 2.2 in. (25.1 x 25.1 x 5.6 cm)
    WeightCatalyst 9136I
    ●  3.6 lb. (1.65 kg)
    Input power requirements●  802.3bt Cisco Universal PoE (Cisco UPOE ®), 802.3at Power over Ethernet Plus (PoE+)
    ●  Cisco power injector, AIR-PWRINJ7=
    ●  802.3af PoE (only for configuration staging, all radios off)
    Catalyst 9136I
    PoE power consumption2.4-GHz radio5-GHz radio6-GHz radioLink speedUSBLink Layer Discovery Protocol (LLDP)
    802.3bt (UPOE)4×48×84×42x 5GY (9W)47.3W
    802.3at (PoE+)2×22×24×41x 2.5GN24.4W
    802.3af (PoE)–––1x 1GN13.95W
    Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues.
    EnvironmentalCatalyst 9136I
    ●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
    ●  Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
    ●  Operating temperature: 32° to 122°F (0° to 50°C)
    ●  Operating humidity: 10% to 90% (noncondensing)
    ●  Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m)
    Note: When the ambient operating temperature exceeds 40°C (104°F), the access point will shift from 8×8 to 4×4 on the 5-GHz radio, and uplink Ethernet will downgrade to a single 1G; however, the USB interface will remain enabled.
    System memory●  2048 MB DRAM
    ●  1024 MB flash
    WarrantyLimited lifetime hardware warranty
    Available transmit power settings2.4 GHz5 GHz6 GHz
    ●  23 dBm (200 mW)●  26 dBm (400 mW)●  23 dBm (200 mW)
    ●  -4 dBm (0.39 mW)●  -1 dBm (0.79 mW)●  -4 dBm (0.39 mW)
    Note: In countries where use of the 6 GHz band is not allowed or there is no current software support, the 6 GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.
    Regulatory domainsNote: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
    For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.
    Compliance standards●  Safety:●  Radio:
    ◦      IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex)◦      EN 300 328 (v2.2.2)
    ◦      EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex)◦      EN 301 893 (v2.1.1)
    ◦      UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex)◦      EN 303 687 (v0.0.14, draft)
    ◦      CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex)◦      AS/NZS 4268 (rev. 2017)
    ◦      AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex)◦      47 CFR FCC Part 15C, 15.247, 15.407
    ◦      UL 2043◦      RSP-100
    ◦      Class III equipment◦      RSS-GEN
    ●  Emissions:◦      RSS-247
    ◦      CISPR 32 (rev. 2015) +AMD1:2019◦      LP0002 (109)
    ◦      EN 55032:2015/A11:2020◦      Japan Std. 66, and Std. 71
    ◦      EN IEC 61000-3-2:2019/A1:2021●  RF safety:
    ◦      EN61000-3-3:2013+A1:2019◦      EN 50385:2017
    ◦      AS/NZS CISPR32: 2015+AMD1:2020◦      AS/NZS 2772 (rev. 2016)
    ◦      47 CFR FCC Part 15B◦      47 CFR Part 2.1091
    ◦      ICES-003 (Issue 7, Class B)◦      RSS-102
    ◦      VCCI-CISPR 32:2016●  IEEE standards:
    ◦      CNS 13438:2006 (95)◦      IEEE 802.3
    ◦      KS C 9832:2019◦      IEEE 802.3ab
    ◦      QCVN 118:2018/BTTTT◦      IEEE 802.3af/at
    ●  Immunity:◦      IEEE 802.11a/b/g/n/ac/ax
    ◦      EN 55035: 2017+A11:2020◦      IEEE 802.11h, 802.11d
    ◦      KS C 9835:2019●  Security:
    ●  Emissions and immunity:◦      802.11i, (WPA2, WPA3)
    ◦      EN 301 489-1 V2.2.3 (2019-11)◦      802.1X
    ◦      EN 301 489-17 V3.2.4 (2020-09)◦      Advanced Encryption Standard (AES)
    ◦      QCVN (18:2014)●  Extensible Authentication Protocol (EAP) types:
    ◦      QCVN 112:2017/BTTTT◦      EAP-Transport Layer Security (TLS)
    ◦      KS X 3124:2020◦      EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2
    ◦      KS X 3126:2020◦      Protected EAP (PEAP) v0 or EAP-MSCHAP v2
    ◦      EN 61000-6-1: 2019◦      EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
    ◦      PEAP v1 or EAP-Generic Token Card (GTC)
    ◦      EAP-Subscriber Identity Module (SIM)
    Certifications●  Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
    ●  Bluetooth SIG: Bluetooth Low Energy

     

    Đánh giá

    Chưa có đánh giá nào.

    Hãy là người đầu tiên nhận xét “C9136I-Q Cisco Catalyst 9136I Series, Internal Antennas,-Q Regulator”

    Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

    Sản phẩm tương tự

    C9130AXE-B

    C9115AXI-B Cisco Catalyst 9115AX Series
    C9130AXI-Z

    C9105AXI-G Cisco Catalyst 9105AX Series
    C9130AXE-EWC-B1

    C9105AXI-F Cisco Catalyst 9105AX Series
    C9130AXE-B

    C9120AXI-S C9120AX Internal 802.11ax 4×4:4 MIMO;IOT;BT5;mGig;USB;RHL