HPE FlexNetwork 5520 48G PoE+ 4SFP+ HI Switch (R8M29A)

HPE FlexNetwork 5520 48G PoE+ 4SFP+ HI Switch (R8M29A)

  • (48) RJ-45 autosensing 100/1000 BASE-T ports (PoE+)
  • Duplex: Ports 1–48 support 10BASE-T/100BASE-TX 1000BASE-T (full only) Ports 41–48 support MACsec
  • 4 SFP Plus 1/10G ports (SFP Plus can also support 1G SFP 1G SFP-GE-T only works at GE.)
  • (1) port expansion module slot.
Hàng chính hãng Giao hàng toàn quốc Sẵn hàng
  • Model: R8M29A

Chat trực tuyến?

Giá bán: Liên hệ giá tốt nhất(Gọi điện, chat zalo hoặc email để nhận báo giá)

Giao hàng tận nơi Miễn phí vận chuyển

HPE FlexNetwork 5520 48G PoE+ 4SFP+ HI Switch (R8M29A)

1.I/O ports and slots:

  • (48) RJ-45 autosensing 100/1000 BASE-T ports (PoE+)
  • Duplex: Ports 1–48 support 10BASE-T/100BASE-TX, 1000BASE-T (full only) Ports 41–48 support MACsec
  • 4 SFP Plus 1/10G ports (SFP Plus can also support 1G SFP and 1G SFP-GE-T only works at GE.)
  • (1) port expansion module slot.

2. Additional ports and slots:

  • 1 dual-personality RJ-45 serial console port, 1 micro-USB console, 1 out-of-band management interface, 1 USB 2.0 port

Configuration Information:

HPE FlexNetwork 5520 48G PoE+ 4SFP+ HI Switch (R8M29A)
I/O ports and slots(48) RJ-45 autosensing 100/1000 BASE-T ports (PoE+);
Duplex: Ports 1–48 support 10BASE-T/100BASE-TX,
1000BASE-T (full only) Ports 41–48 support MACsec
4 SFP Plus 1/10G ports (SFP Plus can also support 1G SFP
and 1G SFP-GE-T only works at GE.)
(1) port expansion module slot
Additional ports and slots1 dual-personality RJ-45 serial console port, 1 micro-USB
console, 1 out-of-band management interface, 1 USB 2.0 port
Physical characteristicsDimensions44 cm (w) x 36 cm (d) x 4.36 cm (h)
Weight≤ 9.6 kg
Memory and processor2 GB SDRAM; packet buffer size: 4 MB,
512 MB flash
Mounting and enclosureMounts in an EIA standard 19 inch telco
rack or equipment cabinet (hardware
included)

Performance

IPv6 Ready Certified
1000 Mb Latency< 5 µs
10 Gbps Latency< 3 µs
Throughput180 Mpps
Routing/Switching capacity336 Gbps
Static MAC table1K
MAC address table sizeUp to 64K, recommended 32K
EnvironmentOperating temperature23°F to 113°F (–5°C to 45°C)
Operating relative humidity5% to 95%, noncondensing
Non-operating/Storage temperature-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage relative humidity5% to 95%, noncondensing
Acoustic68.7 dB ISO 7779
Electrical characteristicsFrequency50/60 Hz
Maximum heat dissipationRanges from 112 BTU/hr to 5943 BTU/hr depending on
power supply configuration
Voltage90 – 264 VAC

–36 VDC to 72 VDC

Current3A
Maximum power rating1110W
Idle power

PoE power

33 W

1440W PoE+

Notes:• Idle power is the actual power consumption of the device
with no ports connected.
• Maximum power rating and maximum heat dissipation are
the worst-case theoretical maximum numbers provided for
planning the infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules populated.
• PoE+ power range is from 450W to 1440W. PoE+ power
is the power supplied by the internal power supplies. It is
dependent on the type and quantity of power supplies. The
device supports 1 or 2 internal modular power supplies.
• DC maximum input current is 6A. Voltage range for
power modules PSR360-56A: 6-3A, PSR720-56A:10-5A,
PSR1110-56A: 12-6A
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1;
EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1;
IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11;
FDA 21 CFR Subchapter J; RoHS Compliance
EmissionsEMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A;
EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008;
VCCI V-3/2012.04; EN 61000-3-2:2006+A1:2009+A2:2009;
EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006;
EN 61000-4-6:2009; CISPR 22:2008 Class A; EN 55022:2010
Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386
V1.6.1; VCCI V-3/2013.04 Class A
ImmunityGenericEN 55024
ESDEN 300 386
ManagementHPE IMC; command-line interface; SNMP
manager
ServicesSee the Hewlett Packard Enterprise
website at hpe.com/networking/services
for details on the service-level descriptions
and product numbers. For details about
services and response times in your area,
contact your local HPE sales office.

Datasheet HPE FlexNetwork 5520 48G PoE+ 4SFP+ HI Switch (R8M29A)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “HPE FlexNetwork 5520 48G PoE+ 4SFP+ HI Switch (R8M29A)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *