HPE FlexNetwork 5140 8G 2SFP 2GT Combo EI Switch (R8J42A)
- I/O ports and slots:
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Duplex: Ports 1-8 support 10BASE- T/100BASE-TX, 1000BASE-T (full only)
2 SFP fixed 1GbE ports
2 GT ports - Additional ports and slots: 1 RJ-45 serial console port
Configuration Information:
| HPE FlexNetwork 5140 8G 2SFP 2GT Combo EI Switch (R8J42A ) | |||
| I/O ports and slots | 8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-8 support 10BASE- T/100BASE-TX, 1000BASE-T (full only) | ||
| 2 SFP fixed 1GbE ports | |||
| 2 GT ports | |||
| Additional ports and slots | 1 RJ-45 serial console port | ||
| Physical characteristics | Dimensions | 10.47(w) x 6.3(d) x 1.72(h) in (26.6 x 16 x 4.36 cm) (1U height) | |
| Weight | 3.3 lb (1.5 kg) | ||
| Memory and processor | 512 MB SDRAM, 256 MB flash | ||
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) | ||
| Performance | IPv6 Ready Certified | ||
| 1000 Mb Latency | < 5 µs | ||
| 10 Gbps Latency | < 3 µs | ||
| Throughput | 18 Mpps | ||
| Routing/Switching capacity | 24 Gbps | ||
| Routing table size | 1024 entries | ||
| MAC address table size | 16384 entries | ||
| Environment | Operating temperature | 23°F to 122°F (-5°C to 50°C) | |
| Operating relative humidity | 10% to 90%, noncondensing | ||
| Non-operating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | ||
| Non-operating/Storage relative humidity | 5% to 95%, noncondensing | ||
| Acoustic | High-speed fan: 36.8 dB; ISO 7779 | ||
| Electrical characteristics | Frequency | 50/60 Hz | |
| Maximum heat dissipation | 27.3/51.2 BTU/hr (28.8/54 kJ/hr) | ||
| Voltage | 100 – 240 VAC | ||
| Current | 10 A | ||
| Maximum power rating | 15 W | ||
| Idle power | 8 W | ||
| Notes: | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. | ||
| Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance | ||
| Emissions | FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 | ||
| Immunity | Generic | EN 55024 | |
| ESD | EN300 386 | ||
| Management | IMC – Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager. | ||
| Services | Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | ||
Datasheet HPE FlexNetwork 5140 8G 2SFP 2GT Combo EI Switch (R8J42A)
Đánh giá
Chưa có đánh giá nào.