Meraki MR86-HW 4×4:4 MU-MIMO 802.11ax

Meraki MR86-HW 4×4:4 MU-MIMO 802.11ax

  • IP67-rated, tested for dust, shock, vibration, and moisture
  • Four radios: 2.4 GHz and 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Ene
  • 4-stream UL/DL MU-MIMO 802.11ax, up to 3.55 Gbps dual-aggregate throughput
  • One multigigabit Ethernet port, PoE: 802.3at
Hàng chính hãng Giao hàng toàn quốc Sẵn hàng

    Chat trực tuyến?

    Giá bán: Liên hệ giá tốt nhất(Gọi điện, chat zalo hoặc email để nhận báo giá)

    Giao hàng tận nơi Miễn phí vận chuyển

    Meraki MR86-HW 4×4:4 MU-MIMO 802.11ax

    • IP67-rated, tested for dust, shock, vibration, and moisture
    • Four radios: 2.4 GHz and 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Ene
    • 4-stream UL/DL MU-MIMO 802.11ax, up to 3.55 Gbps dual-aggregate throughput
    • One multigigabit Ethernet port, PoE: 802.3at

    Meraki MR86-HW data sheet

    Meraki MR76-HW specifications:

    1. Radios
      2.4 GHz 802.11b/g/n/ax client access radio
      5 GHz 802.11a/n/ac/ax client access radio
      2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
      2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
      Concurrent operation of all four radios
      Supported frequency bands (country-specific restrictions apply)
      Supported frequency bands (country-specific restrictions apply):
      2.412-2.484 GHz
      5.150-5.250 GHz (UNII-1)
      5.250-5.350 GHZ (UNII-2)
      5.470-5.600, 5.660-5.725 GHz (UNII-2e)
      5.725 -5.825 GHz (UNII-3)
    2. Antenna
      List of compatible antennas: MA-ANT-20/21/23/25/27 and AIR-ANT2513P4M-N=
      802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
      DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
      4 x 4 multiple input, multiple output (MIMO) with four spatial streams
      SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
      Maximal ratio combining (MRC) & beamforming
      20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
      Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
      Packet aggregation
    3. Power
      Power over Ethernet: 42.5 – 57 V (802.3at compatible)
      Power consumption: 30W max (802.3at required)
      Power over Ethernet injector sold separately
      Note: Actual power consumption may vary depending on the AP usage.
    4. Interfaces
      1x 100/1000/2.5G BASE-T Ethernet (RJ45)
    5. Mounting
      All standard mounting hardware included
      Mounts to walls and vertical poles.
    6. Physical Security
      Two security screws
      Concealed mount plate with anti-tamper cable bay
    7. Environment
      Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C)
      Operating and storage humidity: 5 to 95% non-condensing
      Operating and storage altitude: Up to 40,000 feet (12,192 meters)
      IP67 Environmental rating
    8. Reliability
      Mean Time Between Failure (MTBF): 1,566,656hrs at +25°C operating temperature
    9. Physical Dimensions
      11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts or antennas
      Weight: 1.5 kg
    10. Security

      Integrated Layer 7 firewall with mobile device policy management
      Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
      Flexible guest access with device isolation
      VLAN tagging (802.1q) and tunneling with IPsec VPN
      PCI compliance reporting
      WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)**
      EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
      TKIP and AES encryption
      Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
      Cisco ISE integration for Guest access and BYOD Posturing

    11. Quality of Service
      Advanced Power Save (U-APSD)
      WMM Access Categories with DSCP and 802.1p support
      Layer 7 application traffic identification and shaping
    12. Mobility
      PMK, OKC, & 802.11r for fast Layer 2 roaming
      Distributed or centralized layer 3 roaming
    13. Analytics
      Embedded location analytics reporting and device tracking
      Global L7 traffic analytics reporting per network, per device, & per application
    14. LED Indicators
      1 power/booting/firmware upgrade status
    15. Regulatory
      RoHS
      For additional country-specific regulatory information, please contact Meraki sales
    16. Warranty
      1 year hardware warranty with advanced replacement included
    17. Ordering Information
      MR86-HW: Meraki MR86 Cloud Managed 802.11ax AP
      MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
      MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
      MA-ANT-20 Meraki Dual-Band Omni Antennas
      MA-ANT-25 Meraki Dual-Band Patch Antenna
      MA-ANT-27 Meraki Dual-Band Sector Antenna
      AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam
      Note: Meraki access point license required. For AIR-ANT2513P4M-N= antenna, contact Cisco directly

    Đánh giá

    Chưa có đánh giá nào.

    Hãy là người đầu tiên nhận xét “Meraki MR86-HW 4×4:4 MU-MIMO 802.11ax”

    Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *