HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)

HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)

  • I/O ports and slots:
    16 SFP 100/1000 Mbps ports
    8 SFP dual-personality ports – 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports
    4 SFP+ fixed 1000/10000 SFP+ ports
  • Additional ports and slots: 1 RJ-45 serial console port
  • Power supplies:  “2 power supply slots 1 minimum power supply required (ordered separately)”
Hàng chính hãng Giao hàng toàn quốc Sẵn hàng

    Chat trực tuyến?

    Giá bán: Liên hệ giá tốt nhất(Gọi điện, chat zalo hoặc email để nhận báo giá)

    Giao hàng tận nơi Miễn phí vận chuyển

    HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)

    • I/O ports and slots:
      16 SFP 100/1000 Mbps ports
      8 SFP dual-personality ports – 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports
      4 SFP+ fixed 1000/10000 SFP+ ports
    • Additional ports and slots: 1 RJ-45 serial console port
    • Power supplies:  “2 power supply slots 1 minimum power supply required (ordered separately)”

    Configuration Information:

    HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)
    I/O ports and slots16 SFP 100/1000 Mbps ports
    8 SFP dual-personality ports – 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports
    4 SFP+ fixed 1000/10000 SFP+ ports
    Additional ports and slots1 RJ-45 serial console port
    Power supplies2 power supply slots
    1 minimum power supply required (ordered separately)
    Physical characteristicsDimensions17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
    Weight13.23 lb (6kg)
    Memory and processor512 MB SDRAM,  256 MB flash;
    Mounting and enclosureMounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately)
    PerformanceIPv6 Ready Certified
    1000 Mb Latency< 5 µs
    10 Gbps Latency< 3 µs
    Throughput95 Mpps
    Routing/Switching capacity128 Gbps
    Routing table size1024 entries
    MAC address table size16384 entries
    EnvironmentOperating temperature23°F to 113°F (-5°C to 45°C)
    Operating relative humidity10% to 90%, noncondensing
    Non-operating/Storage temperature-40°F to 158°F (-40°C to 70°C)
    Non-operating/Storage relative humidity5% to 95%, noncondensing
    AcousticLow-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779
    Electrical characteristicsFrequency50/60 Hz
    Maximum heat dissipation102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC powered units heat dissipation is 130 BTU/hr min, 232 BTU/hr max.
    Voltage100 – 240 VAC
    -48 to -60 VDC
    Current5 A
    Maximum power rating60 W
    Idle power30 W
    Notes:–    Idle power is the actual power consumption of the device with no ports connected.
    –    Maximum power rating and maximum heat dissipation are the worst- case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
    –    Power Ratings for AC Power Supply indicated above.
    –    For DC input power, Idle Power is 38W and Max is 68W.
    –    DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362B (AC) or JD366B (DC) power supply.
    SafetyUL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
    Subchapter J; ROHS Compliance
    EmissionsFCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
    GB/T 9254; YD/T 993
    ImmunityGenericEN 55024
    ESDEN300 386
    ManagementIMC – Intelligent Management Center; SmartMC;command-line interface; Web browser; SNMP Manager
    ServicesRefer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
    details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

    Datasheet HPE FlexNetwork 5140 24G 4SFP+ EI Switch (JL828A) 

    Đánh giá

    Chưa có đánh giá nào.

    Hãy là người đầu tiên nhận xét “HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)”

    Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *